Always keep your engine room clean by yourself.

Did you know? Cleaning a car is not just about washing the outside and removing dust from the cabin. We can also clean the engine, or what many people call "engine cleaning". Let's see what engine cleaning is and what are the steps to do it yourself.

 

 

What is engine cleaning? Is it necessary?

 

Engine room cleaning is cleaning the engine room to remove dust, dirt, and various oil stains that have accumulated. In addition to helping to dissipate heat, it also helps us detect abnormalities in the engine room, such as leaks or devices that are at risk of damage.

 

 

10 steps to cleaning your engine room yourself

 

As mentioned earlier, cleaning the car engine compartment is something we can easily do ourselves. However, if you are a new driver or have never tried cleaning it yourself before, you can follow the 10 steps that we have summarized for you.

 

1. Turn off the engine until it is completely cool.

 

The first step to cleaning your car's engine is to turn off the engine and wait for it to cool down completely before you can start cleaning it. This is to prevent damage from heat.

2. Remove the battery terminals.

Once you have checked that the engine is completely cool, remove the battery terminals to prevent the battery from being damaged by water.

 

3. Use food wrap to wrap parts that cannot be exposed to water.

After removing the battery terminals, use food wrap to wrap parts that cannot be exposed to water and take special care of them, such as the electrical system and the ignition system.

4. Spray water all over.

Once you have wrapped the parts with film, wash the engine by spraying water all over to remove dust, dirt, oil, and various dirt that has accumulated in the engine compartment.

5. Clean specific areas with a sponge.

After spraying water, We may find that there are still dirt stains left in various places. Use a sponge soaked in water mixed with a detergent specifically for cleaning the engine room, wring it out until damp, and wipe those dirty parts.

6. Scrub the corners thoroughly.

In addition to cleaning with a sponge, we will notice that there are still some places that a large sponge cannot reach. Let's use a small brush or an old toothbrush to scrub the parts that the sponge cannot reach, so that our engine room is completely clean.

7. Use a blower to blow the engine dry.

When we are sure that we have cleaned every part of the engine room until it is spotless, let's use a blower to blow the car's engine room dry completely to prevent moisture that may interfere with the engine's operation.

8. Apply wax to various parts.

After blowing the engine room until it is completely dry, remove the food preservation film that is wrapped around it. Then apply wax to the rubber and plastic parts to protect those parts from deterioration, which will help extend their service life.

9. Put the battery terminals back in.

When everything is done, let's slowly put the battery terminals back in and check that all parts are in good condition. No parts are broken or damaged during the cleaning.

10. Check the systems.

The last step after cleaning the engine is to try starting the engine to see if the systems are working properly.

 

 

 

 

Frequently asked questions about cleaning the engine

 

What should be careful about when cleaning an old car's engine?

 

For cars that have been used for a long time, it is normal for parts in the engine to deteriorate. Therefore, we must carefully check various points in the engine room before starting the cleaning to see which parts cannot be exposed to water and avoid spraying water directly into the engine room. If anyone is inexperienced or unsure about cleaning an old car's engine room, they should take it to an expert to take care of it to prevent danger and damage.

 

What does the engine light come on after cleaning the engine room?

 

After cleaning the engine room, if you find that the engine light is abnormal, it may mean that some parts are not completely dry or are not properly connected. The engine should be turned off, let it cool down completely, and then check again. However, if the cause is not found, you should take the car to the service center for inspection before continuing to use it.

 

What causes the engine to stall after cleaning the engine room?

 

The engine to stall after cleaning the engine room may also be caused by moisture remaining in the engine. The engine should be turned off and cooled down completely, then use a blower to blow out all the parts again. However, if the symptoms do not go away, you should take your car to the service center for a check-up immediately.

 

We believe that the good information about cleaning the car engine compartment that we have brought to you will help everyone take care of their car with more confidence. And if anyone is looking for a good used car, you can consult Autovilla. We sell used cars that have been thoroughly inspected by experts. Guaranteed quality

 

For more information, please contact

 

Srinakarin branch, Tel. 097-921-9552

Romklao branch, Tel. 095-906-0633

Lam Luk Ka branch, Tel. 092-940-5098

 

References

 

Why clean the car engine compartment? Do it yourself or go to a car care center?. Retrieved on August 12, 2024 from https://www.thairath.co.th/news/auto/tips/2173622